Installing HP-UX 11.0 and Updating HP-UX 10.x to 11.0 HP 9000 Computers Edition 1

Chapter 2 21

Updating an Existing Operating System and Software

HP-UX Update Requirements

Update and Upgrade

Paths

You can use the SD-UX tools to update your OS to a later version of

HP-UX, from 10.01, 10.10, 10.20, or 10.30. For upgrades to 10.x from

9.0x, see the manual Upgrading from HP-UX 9.x to 10.01. You can also

use SD-UX to install or update applications.

Required Kernels • The 32-bit kernel can execute on any Server or Workstation

supported on 11.0, except the V2200 Server.

• The 64-bit kernel executes only on certain Servers. The V2200

requires the use of the 64-bit kernel.

• Not all PA8x00 CPU-equipped systems are supported for 64-bit

operation, even though all PA8x00 CPUs are 64-bit capable.

Supported

Workstations:

At release 11.0, the following 32-bit systems are supported (for 64-bit

server information, see “Updating to HP-UX 11.0”, in this chapter):

Series 700: 712, 715/64, 715/80, 715/100, 715/100XC, 743, 744, 725/100

B-Class: B132L, B160L

C-Class: C100, C110, C160, C160L, C180

J-Class: All J-Class systems

Unsupported

Workstations

Workstations not supported are the following:

705, 710, 715/33, 715/50, 715/75, 720, 725/50, 725/75, 730,

735, 755

Workstations not supported due to required 100BaseT driver are the

following:

B132L+, B180L C200, C240

Supported Servers The following summarizes the HP 9000 Server implementations:

• 32-Bit Only: D, E, G, H, and I-class, K-class (PA7x00), T500, and

T520.

• 32/64-Bit: K-class (PA8x00), and T600,

• 64-Bit Only:V2200