Installing HP-UX 11.0 and Updating HP-UX 10.x to 11.0 HP 9000 Computers Edition 1

52 Chapter 2

Updating an Existing Operating System and Software

Installing Applications Software

If your applications software is already in a depot (SD packaged), it can

be loaded with the Ignite-UX installation. If it is in a non-SD format, you

can create a bundle by using the Ignite-UX tool make_bundle and

install or update it on the target system. See Appendix C, “Ignite-UX

System Administration,”for speciﬁc examples for doing this.

Applications software in SD format can also be loaded later using

SD-UX. For the SD procedures for installing additional software from

tape, CD-ROM or network depots, see “Updating HP-UX Software” or the

manual Managing HP-UX Software with SD-UX.

Adding Additional Functionality

In case you need to add more bundles for the functionality of your new

HP-UX, such as JFS or NFSD ﬁlesets, use the "Match What Target Has"

option described in this chapter, and then select additional bundles

which you have purchased.

If you need further details, see the manual Managing HP-UX Software

with SD-UX.

Installing Patches

See “Section 8: Loading HP-UX Patches Using Ignite-UX” in Appendix C,

“Ignite-UX System Administration,” for detailed information on

installing patches.

Networking Products on Additional Media

If you are using certain networking products or other Independent

Software Units (ISUs) which are not present on the CORE HP-UX CD or

tape, then you may need to follow modiﬁed update procedures. Some of

the networking products affected include FDDI, Token-Ring and 100VG

AnyLan, which are provided on the HP Applications CD-ROM or tape.