Installing HP-UX 11.0 and Updating HP-UX 10.x to 11.0 HP 9000 Computers Edition 1

74 Chapter 3
Installing From Media
Using the Ignite-UX Interface
• For a full Ignite-UX interface install (TUI mode), select Advanced
Installation. You will see the interface shown in Figure 3-12, with
the same functionality as is described in “Using the Ignite-UX
Interface.”, but with TUI navigation. If you need to make
adjustments to LVM parameters, select the Advanced Installation.
Network Information (You will not see this screen if you are doing a media-only installation).
Figure 3-8 netmedia
You can enter networking information on this screen. When you have
entered the needed information, tab to OK and press Enter.
Guided Installation
If you selected the Guided Installation from the User Interface Options
menu, you will be using the Task Wizard illustrated here. The Task
Wizard is intended to provide help for a first-time user of Ignite-UX by
providing on-screen explanation and a limited number of steps to
accomplish a basic installation.
Note that the Task Wizard is available only on a client-managed
(standalone) installation, and is presented in character-mode (TUI).