HP Instant Capacity User's Guide for versions B.07.x
Getting Started
Instant Capacity Requirements
Chapter 2 25
HP-UX 11i v1 Requirements
For Instant
Capacity Versions
B.07.x on HP-UX
11i v1
The following software is required for Instant Capacity versions B.07.x
on HP-UX 11i v1:
❏ HP-UX 11i v1 September 2005 update, or later
❏ iCOD software bundle B9073BA (versions B.07.x) — installed
automatically when the HP-UX 11i v1 Operating Environment (OE)
is installed
❏ The kernel configuration must include the diag2 module
❏ WBEM B8465BA bundle (version A.02.00 or higher)
❏ nPartition provider NPar bundle (version B.11.11.01.03 or higher,
available from the OE)
❏ If you have a virtual partitioned environment, the Virtual Partitions
software (bundle T1335AC) must be version A.02.03 or greater
Required Patches for HP-UX 11i v1
The following patches (or superseded patches) are required for Instant
Capacity versions B.07.x on HP-UX 11i v1:
• PHKL_22987: S700_800 11.11 pstat() patch - Only if your
system runs MeasureWare software
• PHKL_23154: S700_800 11.11 dflush() patch
• PHKL_25218: S700_800 11.11 PDC Call retry,
PDC_SCSI_PARMS, iCOD hang fix
• PHKL_26232: S700_800 11.11 Psets Enablement patch,
FSS iCOD patch
• PHKL_30197: S700_800 11.11 Psets & vPar, Reboot hangs,
serial number
• PHCO_24396: S700_800 11.11 /etc/default/tz patch
• PHCO_24477: S700_800 11.11 sar (1M) patch
• PHCO_29832: S700_800 11.11 reboot(1M) patch
• PHCO_29833: S700_800 11.11 killall(1M) patch
IMPORTANT For the most recent required patches, see the Instant Capacity
Installation page on the HP web site
http://www.hp.com/go/softwaredepot (search for “B9073BA”).