ACC HDLC-NRM (SDLC) User's Guide

16 Chapter1
Overview
Files Provided
Files Provided
The HDLC-NRM (SDLC) Protocol product provides a pre-loaded
firmware file that can be used directly in network configuration files.
TheHDLC-NRM(SDLC)protocolmayalsobeusedonthesameACC
Mux as other protocols. If this is the case, a new .zabs file can be built to
contain all of the protocols that will be used on that Mux. This product
provides the relocatable firmware files and a sample Link command file
for use in this case.
The files provided with the HDLC-NRM (SDLC) product are:
/opt/acc/<card-type>/hdlcnrm.zabs
This is a pre-loaded file that contains
the
frame.zrel and hdlcnrm.zrel
relocatables. It can be referenced
directly from the network configuration
file.
/opt/acc/<card-type>/hdlcnrm.zlnk This link file is used to create the
hdlcnrm.zabs file using the frame.zrel,
hdlcnrm.zrel
and nrment.zrel files.
/opt/acc/protocol/hdlcnrm.zrel This module implements the HDLC
Normal Response Mode Level-2
protocol for both primary and
secondary stations. It provides all of the
polling, response, timeout control and
error recovery, as well as the sending
andreceivingofinformationframes.
/opt/acc/cfg/hdlcnrm_sample.answ This is a sample ttgen configuration
file.