ACC Utilities Reference Guide

110 Chapter4
ZMNTR - ZCOM Runtime Monitor
Commands
MX - Display ACC Card Configuration
Format: MX, m1,m2, [opts]
The command displays the ACC interface card, port and subchan nel
configurations for ACC cards in the range m1 to m2.
The [opts] parameter allows the additional display of the TEXT,
FILENAME, and NAM records from the ACC card download file and also
(for an E1/T1 card) the subchannel and timeslot configuration. The
options can be in any order.
The options are:
N - Display TNAM records
T - Display TEXT records
F - Display FILE records
P - Display port configurations (default)
S - Display subchannel and timeslot configurations
If no options are specified, P is assumed.
Example - Non-E1/T1 card:
Interface card information for ACC ttgen input file
TTGEN source /opt/acc/cfg/loopback.answ
object /opt/acc/cfg/loopback.tmem
Mux:01 Bus:00/00 Slot:01 Trms:0009 Card Stat:Up and active
Hardware Revision: Rev.A
Firmware download file: /opt/acc/z7400a/loopback.zabs
Module: VMUX-1.1 Linktime: Wed Sep 10 05:43:06 1997
ROM-ID: Z7400A [01.B] Updated: Wed Apr 16 16:00:00 1997
Connection: RS232 panel MPU activity: 0%
Pt# Status TXlim TXusd PMode Cmode Ecde Clk Baud Mult Parity
0 Up 20000 0 RS232 SDLC NRZ Int 57.6k X.1 None
1 Up 20000 0 RS232 SDLC NRZ Ext 57.6k X.1 None
2 Up 20000 0 RS232 SDLC NRZ Int 57.6k X.1 None
3 Up 20000 0 RS232 SDLC NRZ Ext 57.6k X.1 None
4 Up 20000 0 RS232 SDLC NRZ Int 57.6k X.1 None
5 Up 20000 0 RS232 SDLC NRZ Ext 57.6k X.1 None
6 Up 20000 0 RS232 SDLC NRZ Int 57.6k X.1 None
7 Up 20000 0 RS232 SDLC NRZ Ext 57.6k X.1 None