ACC Utilities Reference Guide

114 Chapter4
ZMNTR - ZCOM Runtime Monitor
Commands
Example - the “s” option:
If the “S” option is used with the MX command for an E1/T1 card, the
following additional subchannel and timeslot information is provided.
Timeslot assignments
TS Pt0 Tx Rx Pt1 Tx Rx Pt2 Tx Rx Pt3 Tx Rx
0 00:00 00:00 00:00 00:00 00:00 00:00 00:00 00:00
1 01:ff 01:ff 01:ff 01:ff 01:ff 01:ff 01:ff 01:ff
2 02:ff 02:ff 02:ff 02:ff 02:ff 02:ff 02:ff 02:ff
3 02:ff 02:ff 02:ff 02:ff 02:ff 02:ff 02:ff 02:ff
:
:
:
28 03:ff 03:ff 03:ff 03:ff 03:ff 03:ff 03:ff 03:ff
29 03:ff 03:ff 03:ff 03:ff 03:ff 03:ff 03:ff 03:ff
30 03:ff 03:ff 03:ff 03:ff 03:ff 03:ff 03:ff 03:ff
31 03:ff 03:ff 03:ff 03:ff 03:ff 03:ff 03:ff 03:ff
Channel Specifications
Port 0 Port 1 Port 2 Port 3
SC Mode INV ITBS Mode INV ITBS Mode INV ITBS Mode INV
ITBS
0 TRANSA NO 0 TRANSA NO 0 TRANSA NO 0 TRANSA NO 0
1 HDLC NO 2 HDLC NO 2 HDLC NO 2 HDLC NO 2
2 HDLC NO 12 HDLC NO 12 HDLC NO 12 HDLC NO 12
3 HDLC NO 48 HDLC NO 48 HDLC NO 48 HDLC NO 48
:
:
:
28 TRANSA NO 0 TRANSA NO 0 TRANSA NO 0 TRANSA NO 0
29 TRANSA NO 0 TRANSA NO 0 TRANSA NO 0 TRANSA NO 0
30 TRANSA NO 0 TRANSA NO 0 TRANSA NO 0 TRANSA NO 0
31 TRANSA NO 0 TRANSA NO 0 TRANSA NO 0 TRANSA NO 0