ACC Utilities Reference Guide

Chapter 4 121
ZMNTR - ZCOM Runtime Monitor
Commands
Normal Terminal States:
Down The terminal is enabled and activated but the line is
DOWN (or not connected). Usually a hardware
problem. There is nothing waiting on its transmit
queues.
Dn,Sending Terminal is same as “Down” above. I n addition, there is
something pending in its transmit queues.
Deactivated The terminal is enabled but not activated. Messages
may usually be transmitted but not received from the
terminal. There may be protocol-specific exceptions t o
this. Refer to a particular protocol’s User’s Guide for
details.
Disabled The terminal is disabled.
Not init The terminal has not been configured.
Unavailable The terminal is not available for use. Usually this
means that the ACC card is either absent or fa ulty, or
that the port has failed it’s selftest.
Up The terminal is enabled, activated and ready for
message transfer. Currently, there i s no t ransmission
in progress .
Up,Sending The terminal is UP, and there are messages in the
terminal's queue in the process of being transmitted.
Up,SendSusp TheterminalisUP.Therearealsomessageswaitingto
be transmitted, but such messages are not being
processed by the firmware, i.e. unacknowledged queue
is empty. This means the drivers suspended the
terminals transmission, e.g. hitting port limit.