ACC Utilities Reference Guide

134 Chapter5
ZTERM - Interactive Routine Interface
ZTERM Available Commands
DP - Display P hysical Terminal Table Information
Format: DP,ZLU,[ZLU2],[+Q]
Displays the physical terminal information for the specified terminal
ZLU, or range of ZLUs, in hexadecimal and ASCII. The +Q option
suppresses the display of the hexadecimal data. See under “Physical
Terminal Table” in the section on Table and Data Structures in the ACC
Programmer’s Reference Guide, for the physical t erminal table layout.
Example
ZTERM> dp 601
20:11:27 Owning ZLU 601
20:11:27 MUX number 0
20:11:27 Port number 1
20:11:27 Term. number 0
20:11:27 Port linkage A857F0h
20:11:27 HPQ linkage 0h
20:11:27 LPQ linkage 0h
20:11:27 Rx node 0
20:11:27 Rx ZLU 0
20:11:27 Rx node cntrl 0
20:11:27 Rx ZLU cntrl 0
20:11:27 DVT status 9000h
20:11:27 FWT status A100h
20:11:27 Physical type 62
20:11:27 Poll address 0h
20:11:27 Select address 0h
20:11:27 Option word 0h
20:11:27 Call address No address
20:11:27 X25 VC number 0
20:11:27 Tx Msg count 0
20:11:27 Rx Msg count 0
20:11:27 Error count 0
Lcn .00. .01. .02. .03. .04. .05. .06. .07. .08. .09. ASCII.....ASCII....
000 0259 EBB0 0000 0100 0000 0000 0000 0000 0000 0000 Yk0
010 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
020 0000 0000 00A8 57F0 0000 0000 0000 0000 0000 0000 (Wp
030 7FFF FFFF 0000 0000 0000 0000 0000 0000 0000 0000
040 0000 0000 0000 0000 0000 0000 0000 0001 0000 0000
050 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
060 0000 0000 0000 0064 0000 0000 0000 0000 0000 0000 d
070 0000 0000 0000 0000 0000 0000 0000 0000 0000 0001
080 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
090 0000 0000 0000 0000 0000 0064 0000 0000 0000 0000 d
100 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000