ACC Utilities Reference Guide

Chapter 5 147
ZTERM - Interactive Routine Interface
ZTERM Available Commands
SE - Send to ZLU
Format: SE,ZLU,mode,tag1,tag2
Sends a message to the i ndicated ZLU number. The ZLU may b e either a
terminal or a program ZLU. Use ZSCAN to find out the ZLU numbers of
the programs, if necessary. The mode and tag parameters are as
described under zsend in the ZCOM routine calls section. ZTERM
responds to the above command with:
Input message (max 80 chars)
Enter the message to be sent, and press <return>. Uses the zsend
routine call.
ST - Physical Terminal Status
Format: ST,ZLU
Displays the physical terminal status. The ST command is used to
determine the status of the particular terminal ZLU. For example:
ZTERM> st 10
16:17:31 Terminal ZLU # 10,type 25 PTDRST D000H PTFWST 2100H Type X25.LAPB
16:17:31 Logical terminal 289, Mux 1, port 1, terminal 32
16:17:31 Z80 status: Enabled,Fast poll,Inactive,UP
16:17:31 Driver status: Initialized,Enabled,Inactive,Available
16:17:31 1 Receive msgs, 0 Transmit msgs, 131072 Errors
16:17:31 *
ZTERM>
ST translates some of the physical terminal table fields (as provided in
the DP command) into the above information.
SW-SwapPhysicalTerminalTables
Format: SW,ZLUA,ZLUB
The physical terminal table data and associated logical terminals are
exchanged by this command. Makes use of the zxcpt call.