ACC Utilities Reference Guide

Chapter 6 163
ZSCAN - Display ZCOM Tables & Buffers
ZSCAN Available Commands
Example - display the interface table for mux 2 (4-port NIO card):
zscan> it 2
IFT# 2 Status 8005h Terminal 0 Restart errors 0
Type 9 HPA FFA88000h Sflag 0000h Heart beat 13 Restart retry 0
Last ZMON control: Thu Feb 24 05:42:57 2000
Current BP command: 0000 0000 0000 0000 0000
Current terminal list header: 00000000(XPS), 00000000(HTX), 00000000(LTX)
Mux info: 0x01C9
iportn[0..3]=0x14109000, 0x14009000, 0x14109000, 0x14009000
Firmware dynamic configuration parameters:
ttablesize 224 mheadnbr 29490 t0size 4108 tracesize -1
ttablenbr 4678 mquota 8192 t1size 4108 traceopt FFFFFFFFh
zbufsize 160 bquota 15000 t2size 4108
zbufnbr 76588 datadelay 5ms t3size 37464
IFT# Queue N.Msg N.Bytes Head:Tail(hex)... Waits Total.Msg Max.M Limit......
2 IFQok 0 0 00000000:00000000 0 0 2147483647M
2 DRQok 0 0 00000000:00000000 0 0 2147483647M
zscan>
Note that the values in the Head:Tail column are the buffer addresses
that may be used by the BF command to view the buffer contents.