ACC Utilities Reference Guide

164 Chapter6
ZSCAN - Display ZCOM Tables & Buffers
ZSCAN Available Commands
LT - Logical Terminal Table
Format: it [first] [last] [c|q|r]
Displays logical terminal table information from the Logical Terminal
Table (LTT) numbers [first] to [last]. If option [c] is specified, the static
configuration information is displayed. If option [q] is specified, the
detailed information about the LTT data queues is displayed. If option [r]
is specified, the detailed information about any terminal receivers is
displayed. Otherwise, the dynamic run-time information, such as ZLU
list, PTT number and queue header information is displayed.
Example:
zscan> lt 1 2
LTT# ZLU# NxtZ# PTT# SHQ.Msg DQ1.MSG DQ2.Msg DQ3.Msg DQ4.Msg
1111 0 0 0 0 0
2 300 300 2 0 0 0 0 0
zscan> lt12c
LTT# ZLU# MxZLU RcZLU Dtype Ltype Flags Lstat Appno Name................
1 1 0 0 48 99 0000h 0000h 10 L2 DCE
2 300 0 0 49 99 0000h 0000h 99 L3 pvc
zscan> lt12r
LTT# ZLU# MxZLU(Node#) PRZLU(Node#) SHARED RCVRS(Node#)
1 1 0(00000) 0(00000)
2 300 0(00000) 0(00000)
zscan> lt12q
LTT# Queue N.Msg N.Bytes Head:Tail(hex)... Waits Total.Msg Max.M Limit......
1 DHQok 0 0 00000000:00000000 0 0 2147483647M
1 DQ0ok 0 0 00000000:00000000 0 0 2147483647M
1 DQ1ok 0 0 00000000:00000000 0 0 2147483647M
1 DQ2ok 0 0 00000000:00000000 0 0 2147483647M
1 DQ3ok 0 0 00000000:00000000 0 0 2147483647M
1 DQ3ok 0 0 00000000:00000000 0 0 2147483647M
2 DHQok 0 0 00000000:00000000 0 0 2147483647M
2 DQ0ok 0 0 00000000:00000000 0 0 2147483647M
2 DQ1ok 0 0 00000000:00000000 0 0 2147483647M
2 DQ2ok 0 0 00000000:00000000 0 0 2147483647M
2 DQ3ok 0 0 00000000:00000000 0 0 2147483647M
2 DQ3ok 0 0 00000000:00000000 0 0 2147483647M
Note that when the [q] option is used, the values in the Head:T ail column
are the buffer addresses that may be used by the BF command to view
the buffer contents.