ACC Utilities Reference Guide

Appendix A 245
TTGEN Configuration File
System Response
Memory Locations
IFT starts at: 0x00069828
Look up table: 0x00069B80 (8192 bytes)
Command buffer: 0x0006BB80 (256 bytes)
FIRQ buffer: 0x0006BC80 (64 bytes)
Response buffer: 0x0006BCC0 (64 bytes)
STDT buffer: 0x0006BD00 (2048 bytes)
Firmware Information
ROM module: (Rev: )
ROM time:
Download file: /opt/acc/z7200a/x25.zabs
Download module:
Link time:
Req’d Protocol: X25
X25
B3270SE
Page 4 ttlst: x25.tmem Thu Mar 31 16:32:13 1995
Port and Terminal Information
INTERFACE CARD 0 PORT 0
Defined Terminals: 12
Port Tx Limit: 20000 bytes
Port Configuration
Port mode: RS232
Baud rate: 57600
Clock source: Int
Operating mode: SDLC
Clock Multiplier: x1
Encoding mode: NRZ
Parity:
Term# Ptype Optn Poll Select TerminalName/CallNumber Appl# Inst# Brch# Wkst# Area# Ltype ZLU#
----- ----- ---- ------ ------ ------------------------ ----- ----- ----- ----- ----- ----- ----
0 25 0x37 0x0209 0x4BEA L2 DCE 10 0 0 0 0 99 600
1 26 0x40 0x0000 0x0000 L3 svc 99 0 0 0 0 99 1
2 26 0x40 0x0000 0x0000 L3 svc 99 0 0 0 0 99 2
3 26 0x40 0x0000 0x0000 L3 svc 99 0 0 0 0 99 3
4 26 0x40 0x0000 0x0000 L3 svc 99 0 0 0 0 99 4
5 26 0x40 0x0000 0x0000 L3 svc 99 0 0 0 0 99 5
6 26 0x40 0x0000 0x0000 L3 svc 99 0 0 0 0 99 6
7 26 0x40 0x0000 0x0000 L3 svc 99 0 0 0 0 99 7
8 26 0x40 0x0000 0x0000 L3 svc 99 0 0 0 0 99 8
9 26 0x40 0x0000 0x0000 L3 svc 99 0 0 0 0 99 9
10 25 0x37 0x8209 0x4BEA L2 DTE 10 0 0 0 0 99 601
11 62 0x00 0x0000 0x0000 Loopback term 99 0 0 0 0 99 700
INTERFACE CARD 0 PORT 1
Defined Terminals: 10
Port Tx Limit: 20000 bytes
Port Configuration
Port mode: RS232
Baud rate: 57600
Clock source: Ext
Operating mode: SDLC
Clock Multiplier: x1
Encoding mode: NRZ
Parity: