ACC Utilities Reference Guide

54 Chapter2
TTGEN-ZCOMSystemTableGenerator
Creating the TTGEN Configuration File
Port Definitions for E1/T1 Interface:
For more information on the features marked “Z7330B only” refer to the
Siemens document Framing and Line Interface Component for P CM 30
and PCM 24 - FALC-LH PEB 2255 Version 1.3 Data sheet.
in Interface number (defined in the Interface-Definition section)
p Port number in E1/T1 interface card (0-3)
pmode Port mode
E1DB9
E1BNC
E1RJ45
T1DB9
T1BNC
T1RJ45
LBACK
E1 Twisted Pair DB9 120W
E1 coax BNC 75W
E1 Twisted Pair RJ45 100W
T1 Twisted Pair DB9 120W
T1 coax BNC 75W
T1 Twisted Pair RJ45 100W
Loopback Mode (Tri-state)
source Clock Source
INT-
EXT-
CLKPT0-
CLKPT1-
CLKPT2-
CLKPT3-
Use internal baud rate generator
Use recovered clock
Use clock from port 0
Use clock from port 1
Use clock from port 2
Use clock from port 3
fmode Frame mode
F4
SF
ESF
F72
DF
CRCMF
TRANS
T1 - 4 Frame Multiframe
T1 - SF (12 Frame multiframe
T1 - ESF (24 Frame multiframe)
T1 - SLC96 (72 Frame multiframe)
E1 - DF (Doubleframe)
E1 - CRCMF (CRC Multiframe)
Transparent
encode Data encoding mode.
HDB3
B8ZS
E1 - High Density Bipolar/3 zeros
T1 - Bipolar/8 zero substitution