ACC X.25 Protocol User's Guide

36 Chapter3
ZX25D X.25 Protocol Driver
Configuration
last_outsvc Highest Outgoing SVC Logical Channel Number -
Default is 0.
If these have a value other than zero, all the Logical
Channels from first_outsvc to last_outsvc can be used
for CALLs to be made from the DTE to the DCE only.
def_inpacket Default Inbound SVC Packet Size. Default is 0.
def_outpacket Default Outbound SVC Packet Size. Default is 0.
The parameter supplied here is used to configure the
SVC packet size unless overridden at call setup by
facility negotiation. The packet sizes (bytes) which
correspond to these parameters are as follows:
def_inwindow Default Inbound SVC Window S ize. Default is 7.
def_outwindow Default Outbound SVC Window Size.Defaultis7. The
parametersuppliedhereisusedtoconfiguretheSVC
window size unless overridden at call setup by facility
negotiation. The window size must b e in the range one
(1) to seven (7).
T1_timer Optional override configuration for T1. If this
parameter is not supplied, T1 is set from the Select
Word configured for the Link terminal. If this
parameter is supplied then other options a nd
configuration parameters have no affect on the T1
timer. Two parameters must be supplied with this
keyword, the resolution (one of: res_10ms, res_100ms,
res_1s, or res_10s) and the multiplier (an integer in the
range 2 to 255).
0 - 128 8 - 256
1 - Reserved 9 - 512
2 - Reserved 10 - 1024
3 - Reserved 11 - 2048
4 - 16 12 - 4096
5 - 32 13 - Reserved
6 - 64 14 - Reserved
7- 128 15- 240