HyperFabric Administrator's Guide (HP-UX 11i v1)

Planning the Fabric
TCP/UDP/IP
Chapter 224
Menu” to check the system’s firmware version. If the firmware version is
earlier than 3.0, the system has a PA-8500 processor (and so the A4919A
adapter is supported on it). If the firmware version is 3.0 or later, the
A4919A adapter is not supported.
(**) Although the A6092A HF1 adapter is supported on HP 9000
Superdome systems, HP recommends that you use only HF2 adapters
and cables in Superdome systems because the A4892A copper
HyperFabric cable is not flexible enough to use in the cable management
system in the Superdome chassis. To use the copper cable in a
Superdome, you may want to remove some parts of the Superdome
cabinet.
(@) V-Class systems have been obsoleted starting September, 2000.
(@@) HP-UX 10.20 has been obsoleted starting July, 2003.