HyperFabric Administrator's Guide (HP-UX 11i v1)

Installing HyperFabric
Installing the Software
Chapter 358
Installing the Software
This section describes the HyperFabric file structure and the steps
necessary to load the software. The software must be installed on each
instance of the HP-UX operating system in the fabric.
File Structure
The HyperFabric file structure is shown in Figure 3-1 below. The
structure is shown for informational purposes only. The user cannot
modify any of the files or move them to a different directory.
Figure 3-1 HyperFabric File Structure
/
/etc
/rc.config.d
/clic_global_conf
/sbin
/init.d
/clic
/var/adm
/clic_log
/clic_ip_drv.trc
/usr
/conf
/lib
/libclic_dlpi_drv.a
/libha_drv.a
/master.d
/clic
/opt
/clic
/bin
/clic_diag
/clic_init
/clic_mgmtd
/clic_mond
/clic_start
/clic_stat
/lib
/libclic_mgmt.a
/firmware
/clic_fw
/clic_log.old
/opt
/resmon
/dictionary
/clic_01
/clic_ping
/clic_shutdown
/clic_fw_db
/clic_dump
/OLDclic_log
/share
/man
/man1m.Z
/clic_probe
/clic_fw_1x32c
/clic_fw_4x8c
/clic_fw_4x32c
/clic_fw_hf28c
/clic_fw_hf232c
/clic_ip_drv.trc0
/clic_ip_drv.trc1