HP-UX Remote Access Services Administrator's Guide

About This Document
This document describes the Remote Access Services implemented in the HP-UX 11i
v2 and HP-UX 11i v3 operating systems.
It is one of the documents available for the Internet Services suite of products. For a
list of other Internet Services documents, see “Related Information” (page 14). These
documents replace the document Installing and Administering Internet Services
(B2355-90685), which was shipped with releases prior to the HP-UX 11i v2 operating
system.
New and Changed Information in This Edition
The “Creating an Anonymous FTP Directory” (page 37) is updated in this document:
Intended Audience
This manual is intended for system and network administrators responsible for
configuring and maintaining the Internet Services software on the HP-UX 11i v2 or
HP-UX 11i v3 operating system. Administrators are expected to have knowledge of
operating system concepts, commands, and the various routing protocols. It is also
helpful to have knowledge of Transmission Control Protocol/Internet Protocol (TCP/IP)
networking concepts and network configuration. This manual is not a TCP/IP tutorial.
HP-UX Release Name and Release Identifier
Each HP-UX 11i release has an associated release name and release identifier. The
uname(1) command with the -r option returns the release identifier. The following
table lists the releases available for HP-UX 11i.
Supported Processor ArchitectureRelease NameRelease Identifier
PA-RISCHP-UX 11i v1B.11.11
Intel® Itanium® Processor Family
HP-UX 11i v1.5B.11.20
Intel Itanium Processor FamilyHP-UX 11i v1.6B.11.22
Intel Itanium Processor Family
PA-RISC
HP-UX 11i v2.0B.11.23
Intel Itanium Processor Family
PA-RISC
HP-UX 11i v3B.11.31
New and Changed Information in This Edition 13