Installing and Administering Internet Services

Chapter 8 253
Configuring gated
Configuring the RIP Protocol
Figure 8-2 Example of Large RIP Network
A: Cluster Node (or Isolated Node)
There is no need to run gated at this node since it is on a LAN with only
one router. Set a static default route to the cluster server (B) in the
/etc/rc.config.d/netconf file as follows:
ROUTE_DESTINATION[0]= "default"
ROUTE_GATEWAY[0]= "130.15.0.6"
ROUTE_COUNT[0]= "1"
A
B
D
C
E
F
(A) Cluster Node
Isolated Node
or
(B) Root Server
(D) Major Router
(C) Single Node
(E) Major Router
(F) Single Node
130.15.0.5
130.15.0.0
(network number)
130.15.0.6 121.1.0.92
121.1.0.0
(network number)
121.1.0.2
134.5.0.1
133.4.0.1
132.5.0.1
121.1.0.10
121.1.0.15
132.6.0.1
131.5.0.2
136.5.0.0
(network number)
136.5.0.1