A6795A Fibre Channel Mass Storage Adapter Installation Guide, March 2005

HP-UX Installation
Installing the Adapter Offline
Chapter 1
9
In some systems, the A6795A adapter is limited to use in specific slots. The following table identifies these
limitations.
NOTE rp54xx servers have slot restrictions for OLAR.
PCI slots 1 through 4 do not support OLAR.
In these servers, use PCI slots 5 through 12 for OLAR.
CAUTION The optical port protector is used only to protect the adapter port when it is not in use. Do not
use the protector as a diagnostic tool.
To install the A6795A Adapter offline (all systems except Superdome):
1. Shutdown the system.
2. Install the adapter in an available PCI slot.
3. Attach fiber cabling to the adapter. The A6795A adapter uses a fiber optic cable terminated with an LC
connector.
For additional installation instructions, see the system documentation.
Table 1-1
Server Name Product Number Supported Slots
L1000 A5576A 8, 10, 12
L2000 A5191A 3, 4, 5, 6, 8, 10, 12
N4000 Rev. A A3639A 2, 4, 6, 8, 10, 12
N4000 Rev. B A3639B 2, 4, 6, 8, 10, 12
N4000 Rev. C A3639C If
upgraded from
A3639A or A3639B
2, 4, 6, 8, 10, 12