A6826A Fibre Channel Mass Storage Adapter Installation Guide, February 2007

Fibre Channel Adapter Installation for HP-UX

Installing Adapter Hardware

Chapter 1

• Ensure that the system is grounded.

• Open the system to gain access to the PCI backplane.

Step 4. Install the adapter in an available PCI slot.

CAUTION Observe all ESD safety precautions before attempting this procedure. Failure to

follow ESD safety precautions could result in damage to equipment.

• Slide the adapter edge-connector into the PCI slot until it is fully seated.

• Secure the card.

Step 5. Reassemble the system.

Step 6. Attach fiber cabling to the adapter. All Fibre Channel host bus adapters that use the FCD driver

use a cable terminated with an LC connector.

Step 7. Reconnect the power cables.

Step 8. Power on the external stroage devices and system.

• Power on any external storage devices first.

• Power on the system.