AB291A 12-Port 4X Fabric Copper Switch Installation Guide, April 2004

Installation Overview & Planning
Installing HP Fabric Clustering System
Chapter 1
11
Step 5. Fit the sliding rails over the fixed rails with the flanges facing outward until the flanges meet the
rack.
Figure 1-10 Fit Sliding Rail over Fixed Rail
Figure 1-11 Fit Sliding Rail to Rack
Step 6. Attach the rails to the rack, both sides as shown in Figure 1-12.
CAUTION Keep switch supported until rail is attached to the rack.
Figure 1-12 Attach Sliding Rail to Rack
Step 7. Securely attach all rails to the rack.