AB291A Fabric Clustering System Support Guide (12-port Switch), April 2004

HP 12-Port 4X Fabric Copper Switch Commands
Show Commands
Appendix B
132
show backplane
Synopsis:
The show backplane command lists the SEEPROM (Serial Electrically Erasable and Programmable Read
Only Memory) information for the system backplane.
Syntax:
show backplane
Command Modes:
User-execute and privileged-execute modes.
Privilege Level:
General read-only user.
Usage Guidelines:
The information displayed comprises various product serial numbers, the base-MAC address, and the chassis
identification number. This information is used only by product-support personnel.
The fields in the show backplane output are described in the table below.
Examples:
HP-IB> show backplane
================================================================================
Backplane Seeprom
================================================================================
base-mac-addr chassis-id
--------------------------------------------------------------------------------
0:d:9d:fe:a:1c 0xd9dfffffe2a1c
================================================================================
Backplane Seeprom
================================================================================
product pca pca fru
serial-number serial-number number number
Table B-2 show backplane Command Field Descriptions
Field Description
base-mac-addr 24-bit base MAC address of this chassis.
chassis-id Factory-assigned, 64-bit chassis-identification number.
product
serial-number
Factory-assigned product serial number.
pca
serial-number
Printed Circuit Assembly (PCA) serial number.
PCA number Printed Circuit Assembly (PCA) assembly number.
fru number Field replaceable unit number.