AB291A Fabric Clustering System Support Guide (12-port Switch), April 2004

HP 12-Port 4X Fabric Copper Switch Commands
Show Commands
Appendix B
143
show config
Synopsis:
The show config command displays the current configuration as a series of commands executed during the
current CLI session. When executed, this command queries all active service components to collect their
current configuration data and translates the data into a CLI command format for display.
Syntax:
show config
Command Modes:
User-execute and privileged-execute modes.
Privilege Level:
Unrestricted read-write user.
Usage Guidelines:
This is a record of the configuration steps performed and may be saved, edited, and reused to replicate a
configuration.
HP-IB# show config
! Release-1.1.3hp/build020
! Thu Jan 8 13:10:50 2004
enable
config terminal
!
boot-config primary-image-source Release-1.1.3hp/build020
!
ib sm subnet-prefix fe:80:00:00:00:00:00:00 sweep-interval 600
!
interface mgmt-ethernet
ip address 15.13.118.181 255.255.248.0
gateway 15.13.112.1
no shutdown
!
HP-IB#
Defaults:
This command has no defaults.