AB291A Fabric Clustering System Support Guide (12-port Switch), April 2004

HP 12-Port 4X Fabric Copper Switch Commands
Show Commands
Appendix B
145
show fan
Synopsis:
The show fan command displays the status of the two fans that cool the system chassis.
Syntax:
show fan
Command Modes:
User-execute and privileged-execute modes.
Privilege Level:
General read-only user.
Usage Guidelines:
Both fans should be operational while the system is powered-up. If the operational status of a fan is “down”,
contact Customer Support for a fan module replacement.
The fields in the show fan output are described in the table below.
Examples:
HP-IB> show fan
================================================================================
Fan Information
================================================================================
fan oper-status speed
--------------------------------------------------------------------------------
1 up 68
2 up 68
3 up 68
Table B-8 show fan Command Field Descriptions
Field Description
fan Fan module number. Fan 1 is the fan on the left-side as you are facing the front of the chassis. Fan 2
is on the right-side of the chassis. There is only one fan module in the system chassis.
oper status Operational status of the fan. The value is unknown, up, down, or failure. up indicates the fan is
operating correctly.
fan Fan module number.
product serial number Factory-assigned product serial-number.
pca serial-number Printed Circuit-Assembly (PCA) serial-number.
pca number Printed Circuit-Assembly (PCA) assembly-number.
fru number Field-replaceable unit-number.