AB291A Fabric Clustering System Support Guide (12-port Switch), April 2004

HP 12-Port 4X Fabric Copper Switch Commands
Show Commands
Appendix B
160
show ib sm partition
Synopsis:
The show ib sm partition command displays partitions managed by Subnet Managers on the device.
Syntax:
show ib sm partition
Command Modes:
User-execute and privileged-execute modes.
Privilege Level:
HP Fabric read-only user.
Usage Guidelines:
In the output, 7f:ff refers to the default Partition, which cannot be altered. Members of Partitions are
identified by their Node GUID and port-number, as displayed below.
A single Partition can have members that are both full-membership, as well as members that have limited
membership.
Examples:
The following example displays the configuration of all the nodes on all the subnets on the fabric.
HP-IB# show ib sm partition
===============================================================================
Partitions Managed By The Subnet Managers
===============================================================================
subnet-prefix : fe:80:00:00:00:00:00:00
p_key : 7f:ff
partition-members :
node-guid : 00:05:ad:00:00:00:02:40
port-number : 0
member-type : full-member
node-guid : 00:05:ad:00:00:00:02:42
port-number : 0
member-type : full-member
node-guid : 00:05:ad:00:00:00:02:42
port-number : 0