AB291A Fabric Clustering System Support Guide (12-port Switch), April 2004

HP 12-Port 4X Fabric Copper Switch Commands
Show Commands
Appendix B
211
show ntp
Synopsis:
The show ntp command displays the current system date and time, as well as the Network Time Protocol
(NTP) servers used to set the system clock.
Syntax:
show ntp
Command Modes:
User-execute and privileged-execute modes.
Privilege Level:
General read-only user.
Usage Guidelines:
Use the clock command to set the time and date. Use the ntp configuration command to set the NTP servers
that are to maintain the system clock.
Examples:
HP-IB> show ntp
===============================================================
NTP Information
===============================================================
Date : 04/16/03
Time : 16:02:43
Server One : 10.3.120.55
Server Two : 10.3.120.56
Server Three : 10.3.120.57
HP-IB>
Defaults:
This command has no defaults.
Related Commands:
“ntp” on page 275
“clock” on page 250