AB291A Fabric Clustering System Support Guide (12-port Switch), April 2004

HP 12-Port 4X Fabric Copper Switch Commands
Show Commands
Appendix B
215
show sensor
Synopsis:
The show sensor command displays the temperature at several key locations within the system chassis.
Syntax:
show sensor
Command Modes:
User-execute and privileged-execute modes.
Privilege Level:
General read-only user.
Usage Guidelines:
The show sensor command identifies the temperature sensors in the system chassis. It also reports their
location in the chassis and the current temperature at that location. Chassis temperature should be
monitored to verify the cooling efficiency of the blowers and your data center air-conditioning.
Temperatures are in Celsius and vary depending upon their location.
Examples:
HP-IB> show sensor
================================================================================
Sensor Information
================================================================================
sensor oper-status temperature(c)
--------------------------------------------------------------------------------
1/1 up 30
Defaults:
This command has no defaults.
Related Commands:
“show fan” on page 145
“show power-supply” on page 212