AB291A Fabric Clustering System Support Guide (12-port Switch), April 2004

HP 12-Port 4X Fabric Copper Switch Commands
Show Commands
Appendix B
216
show snmp
Synopsis:
The show snmp command lists the SNMP receivers for switch link-traps, as well as contact and location
information.
Syntax:
show snmp
Command Modes:
User-execute and privileged-execute modes.
Privilege Level:
Unrestricted read-write user.
Usage Guidelines:
None.
Examples:
HP-IB# show snmp
============================================================================
SNMP Information
============================================================================
contact : [e-mail]
location : 3000 Hanover Street, Palo Alto, CA 94304
============================================================================
Trap Receivers
============================================================================
ipaddr version community
----------------------------------------------------------------------------
10.3.0.111 v2c public
HP-IB#
Defaults:
This command has no defaults.
Related Commands:
“location” on page 271
“snmp-server” on page 281