AB291A Fabric Clustering System Support Guide (12-port Switch), April 2004

HP 12-Port 4X Fabric Copper Switch Commands
Show Commands
Appendix B
219
show terminal
Synopsis:
The show terminal command shows the terminal parameters and configurations, such as time-outs and
maximum allowable command length.
Syntax:
show terminal
Command Modes:
User-execute and privileged-execute modes.
Privilege Level:
General read-only user.
Usage Guidelines:
This command is intended primarily for program debug under the direction of Support personnel.
The number of applications and modules may change between releases. The numbers assigned to applications
and modules may also change. Check application and module number assignments using CLI help (i.e.,?) for
entering command arguments.
Examples:
HP-IB# show terminal
Console is enabled
Connection host address is 10.10.253.128
Length: 25 lines, Width: 80 columns
Timeouts: enabled, Value: 15 minutes
Session limit is set to 3
History is enabled, history size is 30
Maximum command length is 512 characters
Maximum login attempts is 5
Defaults:
This command has no defaults.
Related Commands:
“telnet” on page 282
“terminal time-out” on page 283