AB291A Fabric Clustering System Support Guide (12-port Switch), April 2004

HP 12-Port 4X Fabric Copper Switch Commands
HP Fabric Clustering System Commands
Appendix B
241
HP-IB(config)# ib-agent switch 00:05:ad:00:00:00:13:da node-string "Switch 0, LID 2"
HP-IB(config)# exit
Defaults:
This command has no defaults.
Related Commands:
“show ib-agent summary” on page 177
“show ib sm configuration” on page 149
“interface ib” on page 241
interface ib
Synopsis:
Use the interface ib command to enter Configuration Interface Infiniband (config-if-ib) submode.
Syntax:
interface ib interface(s) [all]
Command Modes:
Configuration Interface (config-if) mode.
Privilege Level:
HP Fabric read-write user.
Usage Guidelines:
none.
Examples:
HP-IB(config-if)# interface ib 15/1-15/5
HP-IB(config-if-ib-15/1-15/5)#
Defaults:
This command has no defaults.
Related Commands:
“link-trap” on page 242
Table B-50 interface ib Command Syntax Description
Syntax Description
interface(s) The interface or interfaces that you want to configure. You can enter one interface, multiple interfaces, or
a range of interfaces. For example: 15/1 - 15/3
all Use the all keyword to select all HP Fabric Clustering System interfaces on the system.