AB291A Fabric Clustering System Support Guide (12-port Switch), April 2004

HP 12-Port 4X Fabric Copper Switch Commands
Administrative Commands
Appendix B
245
Administrative Commands
This chapter lists and describes Administrative commands in alphabetical order.
Table B-54 Administrative Commands
Command Description
action Configure Card settings. See “action” on page 247
boot-config Configure system boot information. See “boot-config” on page 248
broadcast Send a message to all users that are logged-in. See “broadcast” on
page 249
card Configure card settings. See “card” on page 250
clock Configure clocks. See “clock” on page 250
configure Configure card settings. See “configure” on page 251
copy Copy a file or execute the contents of a config file. See “copy” on
page 252
delete Remove image, configuration, and log files from the system chassis.
See “delete” on page 254
dir Lists the system-image, configuration, and log files on system chassis.
See “dir” on page 255
disable Used to exit the privileged-execute mode and return to the user-execute
mode.
See “disable” on page 257
enable Used to enter the privileged-execute mode from the user-execute mode.
See “enable” on page 258
exec Used to execute a file.
See “exec” on page 259
exit Used to leave the current mode for the previous mode or the
user-execute mode.
See “exit” on page 259
ftp-server enable Use to enable or disable ftp-services.
See “ftp-server enable” on page 260
gateway Gateway functions are not supported by HP Fabric Clustering System
help Describes the types of help information available and ways to display
specific command-line information.
See “help” on page 263
history Shows command history. See “history” on page 264
hostname Assigns a name to the system. See “hostname” on page 265
install Installs a downloaded system-image to the appropriate locations. See
“install” on page 266