AB291A Fabric Clustering System Support Guide (12-port Switch), April 2004

HP 12-Port 4X Fabric Copper Switch Commands
Administrative Commands
Appendix B
255
Command Modes:
Privileged-execute mode.
Privilege Level:
Unrestricted read-write user.
Usage Guidelines:
Active images cannot be deleted. Refer to “Deleting System Images and Image Files” on page 78 for directions
about how to make a system-image inactive in order to delete it.
To delete a system-image from an individual gateway or switch cluster connection, use the card action
command (some gateway functions are not supported by HP Fabric Clustering System).
Examples:
HP-IB# delete config:ip-back.cfg
******
HP-IB#
Defaults:
This command has no defaults.
Related Commands:
“card” on page 250
“copy” on page 252
“dir” on page 255
dir
Synopsis:
The dir command lists the system-image, configuration, and log files on the system chassis.
Syntax:
dir config | image | syslog
This command requires one of three arguments: config, image, or syslog. The files are stored on the the
system chassis in separate file-systems. The CLI automatically tracks these file-systems so you do not need to
include file-path information to administer these files.
Table B-63 dir Command Argument Descriptions
Argument Description
config Lists the configuration files.