AB291A Fabric Clustering System Support Guide (12-port Switch), April 2004

HP 12-Port 4X Fabric Copper Switch Commands
Administrative Commands
Appendix B
277
round-trip min/avg/max = 0.000000/0.000000/0.000000 ms
HP-IB#
Defaults:
This command has no defaults.
Related Commands:
“hostname” on page 265
radius-server
Synopsis:
The radius-server command configures a radius-server.
Syntax:
radius-server {host ip address}
Command Modes:
Privileged-execute mode.
Privilege Level:
General read-write user.
Usage Guidelines:
None.
Examples:
HP-IB> enable
HP-IB# config
HP-IB(config)# radius-server host 10.5.0.100
Defaults:
This command has no defaults.
Related Commands:
“clock” on page 250
“snmp-server” on page 281
Table B-73 radius-server Syntax Descriptions
Syntax Description
host Enter this keyword before the ip address of the radius-server.
ip address Enter the ip address of the radius-server that is to be configured.