AB291A Fabric Clustering System Support Guide (12-port Switch), April 2004

HP 12-Port 4X Fabric Copper Switch Commands
Administrative Commands
Appendix B
284
Command Modes:
User-execute and privileged-execute modes.
Privilege Level:
General read-write user.
Usage Guidelines:
Changes to this parameter are applied immediately to all users, whether logged in now or who log in later.
Note that system time-outs may still apply if you are using Telnet or SSH to connect to the system.
Examples:
HP-IB# terminal time-out 60
Defaults:
The default time-out interval is 15 minutes.
Related Commands:
“show system-services” on page 217
trace
Synopsis:
The trace command tracks internal system program modules that are called for a specific interface card. This
feature is intended primarily for program debug under the direction of Support personnel.
Syntax:
trace app app module mod level lev flowmask val card card
app is an integer indicating the internal application to trace.
mod is the program module in side the application.
lev is the verbosity of the trace information returned.
val is a decimal or hex value.
card is the slot number of the card being traced.
Command Modes:
Global-configuration mode.
Privilege Level:
General read-write user.
Usage Guidelines:
The number of applications and modules may change between releases. The numbers assigned to applications
and modules may also change. Check application and module number assignments using CLI help (i.e.,?)
before executing this command, as shown in the example below.