AB291A Fabric Clustering System Support Guide (12-port Switch), April 2004

Chapter 5
Administration and Management
HP-UX Host Administration and Management
47
Displaying Connectivity Information Using Itutil
Displaying Reliable Connection Details
Description: This parameter displays reliable connection details for all specified adapters. If an adapter is not
specified using the -i parameter, the -c command displays reliable connection details for every HP Fabric
Clustering System interface configured on the host.
Syntax: itutil -c [-i interface name|-t transport type]
Syntax Example: itutil -c
Output Example:
========================================================================
Number of Interface Adapters on this node: 1
========================================================================
General Information:
========================================================================
Interface Adapter Name : ib0
H/W Path : 0/4/1/0/0/0
Transport Type : IT_IB_TRANSPORT
IT API Version Number : 1.0
IA Software Version Number : 1.0
IA Firmware Version Number : 3.1.0
Firmware Type : Performance
IA supported transport service types : IT_RC_SERVICE
Number of Spigots(Ports) on IA : 2
Spigot specific Information
Spigot identifer : 1
Spigot online : YES
Num Network Addresses : 1
Primary Network Address : fe80::ca07:2001
Spigot identifer : 2
Spigot online : NO
Num Network Addresses : <Unassigned>
========================================================================
Connection Information :
========================================================================
Connection State : TIMEWAIT
Adapter Name : ib0
Process ID : Process Exited
Connection EVD <pi,ci> : <0x1, 0x1>
Connection Type : Active