AB291A Fabric Clustering System Support Guide (12-port Switch), April 2004
Table Of Contents
- About This Document
- 1 Introduction to Technology
- 2 Hardware Overview
- 3 Installation Planning
- 4 Installing HP Fabric Clustering System
- 5 Administration and Management
- HP-UX Host Administration and Management
- Switch Administration and Management
- CLI Overview
- Using the CLI
- Advanced Switch Setup
- Configuration, Image, and Log Files
- Configuration, Image, and Log File Overview
- File Management
- Listing Configuration, Image, and Log Files
- Viewing Configuration Files
- Viewing Log Files
- Saving Configuration Files
- Saving for System Reboot
- Saving the Backup Configuration
- Specifying the Configuration to Use at
- Saving and Copying Files
- Downloading Files to the System
- Deleting Configuration, Image, and Log Files
- Managing Log Files
- Understanding the Log Format
- Uploading Log Files
- Administering the System
- 6 Monitoring and Troubleshooting
- A Specifications
- B HP 12-Port 4X Fabric Copper Switch Commands
- Show Commands
- show arp ethernet
- show arp IB
- show authentication
- show backplane
- show boot-config
- show card
- show card-inventory
- show clock
- show config
- show fan
- show host
- show ib
- show ib sm configuration
- show ib sm multicast
- show ib sm neighbor
- show ib sm node subnet-prefix
- show ib sm partition
- show ib sm port
- show ib sm service
- show ib sm switch
- show ib-agent channel-adapter
- show ib-agent summary
- show ib-agent switch
- show ib-agent switch linear-frd-info
- show ib-agent switch all mcast-info lid
- show ib-agent switch all node-info
- show ib-agent switch all pkey-info
- show ib-agent switch port-info
- show ib-agent switch sl-vl-map
- show ib-agent switch switch-info
- show interface ib
- show interface ib sm
- show interface ib sm statistics
- show interface mgmt-ethernet
- show interface mgmt-ib
- show interface mgmt-serial
- show ip
- show location
- show logging
- show ntp
- show power-supply
- show running-status
- show sensor
- show snmp
- show system-services
- show terminal
- show trace
- show user
- show version
- IP Commands
- HP Fabric Clustering System Commands
- Administrative Commands
- action
- boot-config
- broadcast
- card
- clock
- configure
- copy
- delete
- dir
- disable
- enable
- exec
- exit
- ftp-server enable
- gateway
- help
- history
- hostname
- install
- interface
- interface mgmt-ethernet
- interface mgmt-ib
- ip
- location
- login
- logging
- logout
- more
- ntp
- ping
- radius-server
- reload
- shutdown
- snmp-server
- telnet
- terminal length
- terminal time-out
- trace
- type
- username
- who
- write
- Show Commands
- C How to Use Windows HyperTerminal
- Glossary
Chapter 5
Administration and Management
Switch Administration and Management
86
Step 5. Verify that you had successfully removed the log file.
HP-IB# dir syslog
========================================================
Existing Syslog-files on System
========================================================
slot date-created size file-name
--------------------------------------------------------
1 Wed Nov 26 11:19:25 2003 849964 ts_log
1 Tue Oct 21 16:00:03 2003 50373 ts_log.1.gz
1 Tue Sep 23 13:00:04 2003 54514 ts_log.2.gz
Deleting Image Files To remove an uninstalled image file:
Step 1. Log in to the CLI as a super user.
Step 2. Enter the privileged-user mode.
HP-IB> enable
HP-IB#
Step 3. Determine the currently installed system-images.
HP-IB# dir image
=========================================================================
Existing Boot-Images on System
=========================================================================
slot date-created size file-name
-------------------------------------------------------------------------
1 Mon Nov 17 14:20:09 2003 18911083 HP-AB291A-Release-1.1.3hp-build019.img
1 Mon Nov 17 14:20:09 2003 18911083 HP-AB291A-Release-1.1.3hp-build021.img
1 Mon Nov 17 14:27:51 2003 13082624 Release-1.1.3hp/build021
HP-IB#
Step 4. Enter the delete command to remove an image file with a .img extension.
You cannot delete the system-image that booted the system because it is the actively being used.
The syntax of the delete command is:
delete image: image file | system image
where the image keyword and colon (:) are mandatory, and indicate the image file-system. image
file is the name of an image file and system image is the name of an installed system-image. Enter
either an image file name or installed system-image. Enter the name exactly as shown by the dir
command. For example:
HP-IB# delete image:HP-AB291A-Release-1.1.3hp-build019.img <- image file
Delete file HP-AB291A-Release-1.1.3hp-build019.img? [yes/no] y
******
HP-IB#
Step 5. Verify that you had successfully removed the system-image or image file.