AB378B Fibre Channel Mass Storage Adapter Installation Guide, December 2006

Fibre Channel Adapter Installation for HP-UX
Attaching the Adapter to Other Fibre Channel Devices
Chapter 1
9
Figure 1-1 AB378B Single Port Fibre Channel Adapter and Port WWN
Attaching the Adapter to Other Fibre Channel Devices
To attach the adapter to other Fibre Channel devices, follow these steps:
1. Remove the Fibre Channel host bus adapter’s optical port protector (if included).
2. Attach a connector cable to the Fibre Channel host bus adapter.
a. Align the slotted plug with the keyed connector.
b. Push the connector in until you hear it click.
3. Attach the free end of the cable to a compatible Fibre Channel device.
4. Reconnect the power cord, if necessary, and power on the system.
Table 1-1 lists the Fibre Channel cables that you can use when connecting devices to Fibre Channel host bus
adapters.