AB379B Fibre Channel Mass Storage Adapter Installation Guide, February 2007
Table Of Contents
- AB379B Fibre Channel Mass Storage Adapter Installation Guide
- 1 Fibre Channel Adapter Installation for HP-UX
- Prerequisites
- Important Patches and Updates
- Installing Driver Software
- Installing Adapter Hardware
- Attaching the Adapter to Other Fibre Channel Devices
- Verifying the Fibre Channel Adapter Installation
- LED Interpretation
- Obtaining Card Information after Installation
- Verifying Connectivity
- Interpreting Legacy Hardware Paths (HP-UX 11i v1 and 11i v2)
- Interpreting Lunpath Hardware Paths (HP-UX 11i v3)
- Components of Lunpath Hardware Paths
- Fibre Channel
- 2 Fibre Channel Adapter Installation for OpenVMS
- Prerequisites
- Installing Driver Software
- Installing Adapter Hardware
- Attaching the Adapter to Other Fibre Channel Devices
- Verifying the Fibre Channel Adapter Installation
- Additional Configuration Information
- LED Interpretation
- A Technical Specifications and Regulatory Information
- AB379B Technical Specifications
- FCC Statement (For U.S.A.)
- Canada
- EMI (Australia and New Zealand)
- VCCI (Japan) (PCI Card Only)
- EMI Statement (European Community)
- Laser Safety Statements
- AB379B Declaration of Conformity
Fibre Channel Adapter Installation for OpenVMSVerifying the Fibre Channel Adapter InstallationChapter 225Error count 0 Operations completed 2980Owner process ““ Owner UIC [SYSTEM]Owner process ID 00000000 Dev Prot S:RWPL,O:RWPL,G,WReference count 0 Default buffer size 0Current preferred CPU Id 1 Fastpath 1Current Interrupt CPU Id 1FC Port Name 5006-0B00-003B-48F6 FC Node Name 5006-0B00-003B-48F74. Start the System Dump Analyzer and confirm that the Fibre Channel ports are usable by performing thefollowing commands for each device. A Link State value of 00000001 means the Fibre Channel port isproperly configured.$ ANALYZE/SYSTEMOpenVMS system analyzerSDA> FC SET DEVICE FGASDA> FC SHOW PORTOverview--------Context ........ Live from RATBRN (3.302), 13-SEP-2006 15:03:56.45Device ......... FGA0:, PCI device ID 2422Images ......... FW 4.00.22, SYS$PGQDRIVER X-36 linked 13-SEP-2006 10:43:38.13FibreChannel ... Node WWID 5006.0B00.003B.48F5, Port WWID 5006.0B00.003B.48F4, Port ID 0C8B00Structures Counters Resources State---------- -------- --------- -----NVRAM .............. 8268BF90 Errors/Missed ..... 0000/000 Pool (bytes) .... 0029A900 Link State ...... 00000001FICB ............... 827172D0 KCHs .............. 00000002 Free DSDLs ...... 00000000 Port State ...... 00000000UCB ................ 8268CB00 DIPL Interrupts ... 0068E670 Free MBDs ....... 00000000 Busy Flags ...... 00000001UCTX ............... 8270D280 FIPL Interrupts ... 0068E670 Free FCCDs ...... 00000000 MBX Owner ....... 00000000LSDB ............... 82717510 Asynch Events ..... 0000149C Free CRCTXs ..... 00000000 MBX Waiters ..... 00000000Previous LSDB ...... 82717590 Asynch IOCBs ...... 00000000 Map Registers ... 00000BD0 Port Waiters .... 00000000KDB ................ 8270D2A8 Request IOCBs ..... 000E9101 PGQ_ERLs ........ 00000000 IOCB Waiters .... 00000000Kernel KCH ......... 82716C10 Response IOCBs .... 006EB4EA Fabric FC-LAs ... 00000039 Active FCCDs .... 00000001Static Counters .... 827137C0 Marker IOCBs ...... 00000000 Loop FC-LAs ..... 00000000 Req Que In ...... 00000033Dynamic Counters ... 82721950 CTR Spare #1 ...... 00000000 UCTX Spare #1 ... 8270D780 Rsp Que Out ..... 0000006ASPDT ............... 8272B100 CTR Spare #2 ...... 00000000 UCTX Spare #2 ... 00000000 Markers Due ..... 00000000SDA>5. Use the System Dump Analyzer to confirm the connectivity to the SCSI/FCP Targets which are visiblethrough the Fibre Channel ports. An STDT Stat value of 0001 means that the SCSI/FCP Target isavailable to OpenVMS:
- A Technical Specifications and Regulatory Information
- Interpreting Lunpath Hardware Paths (HP-UX 11i v3)