AB379B Fibre Channel Mass Storage Adapter Installation Guide, February 2007
Table Of Contents
- AB379B Fibre Channel Mass Storage Adapter Installation Guide
- 1 Fibre Channel Adapter Installation for HP-UX
- Prerequisites
- Important Patches and Updates
- Installing Driver Software
- Installing Adapter Hardware
- Attaching the Adapter to Other Fibre Channel Devices
- Verifying the Fibre Channel Adapter Installation
- LED Interpretation
- Obtaining Card Information after Installation
- Verifying Connectivity
- Interpreting Legacy Hardware Paths (HP-UX 11i v1 and 11i v2)
- Interpreting Lunpath Hardware Paths (HP-UX 11i v3)
- Components of Lunpath Hardware Paths
- Fibre Channel
- 2 Fibre Channel Adapter Installation for OpenVMS
- Prerequisites
- Installing Driver Software
- Installing Adapter Hardware
- Attaching the Adapter to Other Fibre Channel Devices
- Verifying the Fibre Channel Adapter Installation
- Additional Configuration Information
- LED Interpretation
- A Technical Specifications and Regulatory Information
- AB379B Technical Specifications
- FCC Statement (For U.S.A.)
- Canada
- EMI (Australia and New Zealand)
- VCCI (Japan) (PCI Card Only)
- EMI Statement (European Community)
- Laser Safety Statements
- AB379B Declaration of Conformity
Technical Specifications and Regulatory InformationFCC Statement (For U.S.A.)Appendix A28FCC Statement (For U.S.A.)Federal Communications Commission Radio Frequency Interference StatementWARNING This device complies with Part 15 of the FCC rules. Operation is subject to thefollowing two conditions:(1) This device may not cause harmful interference and(2) this device must accept any interference received, including interference thatmight cause undesired operation.This equipment has been tested and found to comply with the limits for a Class Adigital device, pursuant to Part 15 of the FCC rules. These limits are designed toprovide reasonable protection against harmful interference when the equipment isoperated in a commercial environment. This equipment generates, uses and canradiate radio frequency energy, and, if not installed and used in accordance with theinstruction manual, may cause harmful interference to radio communications.Operation of this equipment in a residential area is likely to cause interference, inwhich case the user at his own expense will be required to take whatever measuresmay be required to correct the interference.Hewlett-Packard’s system certification tests were conducted with HP-supportedperipheral devices and cables, such as those received with your system. Changes ormodifications to this equipment not expressly approved by Hewlett-Packard couldvoid the user’s authority to operate the equipment.CanadaWarning: This Class A digital apparatus meets all requirements of the Canadian Interference-CausingEquipment Regulations.Cet appareil numérique de la classe A respecte toutes les exigences du règlement sur le matériel brouilleur duCanada.EMI (Australia and New Zealand)This product meets the applicable requirements of the Australia and New Zealand EMC Framework.
- A Technical Specifications and Regulatory Information
- Interpreting Lunpath Hardware Paths (HP-UX 11i v3)