ACC Error Guide

ZCOM Driver Log Messages
ZCOM Driver Messages
Chapter 5102
zcom 00206: Card <#> Port <#> configuration failed with error <#>.
Explanation: A $PORT backplane transaction was issued to the
ACC Mux card which completed with an error. This
could be due to an illegal configuration or a self-test
failure for that port.
Action: If due to a bad configuration, correct your TTGEN
configuration file. If the port failed its self-test, the port
will remain unusable. You will need to replace the ACC
Mux card to correct that condition. If this does not
appear to be either a hardware problem or
configuration problem, contact your HP Support
Representative.
zcom 00207: ZLU <#> Set terminal parameters failed with error <#>.
Explanation: A $TERM backplane transaction to set the terminal
(ZLU) parameters was issued to the ACC Mux card
which completed with an error. This could be due to a
bad TTGEN configuration.
Action: If due to a bad configuration, correct your TTGEN
configuration file. If this does not appear to be either a
hardware problem or configuration problem, contact
your HP Support Representative.
zcom 00208: ZLU <#> Enable/Activate terminal failed with error <#>.
Explanation: A $TERM backplane transaction to enable and/or
activate a terminal ZLU was issued to the ACC Mux
card which completed with an error. This could be due
to a bad TTGEN configuration.
Action: If due to a bad configuration, correct your TTGEN
configuration file. If this does not appear to be either a
hardware problem or configuration problem, contact
your HP Support Representative.