ACC Error Guide

ZCOM Driver Log Messages
ZCOM Driver Messages
Chapter 5108
Action: Contact your HP Support Representative.
zcom 00223: Card <#> Port <#> Term <#>: Zc_qbadd failed with
error <#>! Unable to allocate a buffer for inbound data.
Explanation: While attempting to allocate a ZCOM subsystem buffer
for inbound data an unexpected failure occurred.
Action: Examine the error returned and check the ZCOM
manuals. If this appears to be an internal defect in the
product and abnormal behavior is observed or this
problem reoccurs, contact your HP Support
Representative.
zcom 00224: Card <#> External interrupt arrived during DMA operation.
Explanation: The DAM was entered with an interrupt message
during a DMA operation but the interrupt was not a
DMA completion interrupt.
Action: In most cases you can ignore this message. However, if
this problem occurs frequently or if abnormal behavior
is observed, it might indicate a pending hardware
failure.