ACC Error Guide

ZCOM Driver Log Messages
ZCOM Driver Messages
Chapter 5 113
zcom 00252: Card <#> - Too few or too many quads in backplane
request.
Explanation: This is an internal defect.
Action: Contact your HP Support Representative.
zcom 00300: Card <#> - NULL PTT entry in IFT->ifplook[] table!
Terminal number = <#>.
Explanation: See “zcom 00211: Card <#> - NULL PTT entry in
IFT->ifplook[] table! Port number = <#> Terminal
number = <#>.”
zcom 00301: ZLU <#> bad reply (status = <#>), data dropped!
Explanation: See “zcom 00222: ZLU <#> RXDT bad reply (status =
<#>), data dropped!.”
zcom 00302: Card <#> - Firmware failure detected, bad FIRQ type card
reset)!
Explanation: See “zcom 00230: Card <#> - Firmware failure
detected, bad IRQ type (card reset)!”
zcom 00303: Card <#> Subchannel <#> is out of transmit buffers.
Explanation: See “zcom 00219: Card <#> Port <#> Port is out of
transmit buffers.”
zcom 00304: Card <#> Subchannel <#> No buffers and no requests
pending
Explanation: See “zcom 00229: Card <#> Port <#> No buffers and no
requests pending”.