ACC Error Guide

ZMON Error Messages

Chapter 6124

Message 040 - ioctl(getirr) error: <zcom error>

Explanation: This message is displayed when ZMON receives an

error while reading an event from the LDM interface

request queue. After displaying this error, ZMON will

terminate.

Action: Restart ZMON with ZMON QUEUE. If this still does

not clear the problem try rebooting the HP-UX system;

and then report the problem to HP.

Message 041 - Request at <date/time> - restart card <card number>

Explanation: Message is displayed as a result of an LDM generated

event (such as powerfail) to restart a Mux card.

Action: None

Message 042 - Card <number>: card number out of range, request

ignored

Explanation: Message displayed as a result of the ZMON request

being issued with a Mux number larger than the

number of muxes (actually N-1) configured in the

TTGEN memory image file.

Action: If problem persists report it to HP.

Message 043 - Card <number> ZMON file open error: <reason>

Explanation: Message is displayed if ZMON is unable to open the

/dev/zmon file after it receives an event message from

the LDM event queue. If this error is reported, than the

card needing attention will not be restarted.

Action: Manually issue a ZMON RESTART request to the Mux

card number reported in the message. If the problem

persists, check that the file /dev/zmon exists and has

the correct access permissions. Rectify the file

problems if possible.