ACC Error Guide

ZMON Error Messages

Chapter 6126

Message 050 - Card number out of range, restart ignored

Explanation: Message printed as a result of the ZMON RESTART

request being issued with an invalid card (MUX

interface) number.

Action: Reissue the RESTART request with the correct card

number.

Message 051 - Card number out of range, shutdown ignored

Explanation: Message printed as a result of the ZMON SHUTDOWN

request being issued with a Mux number larger than

the number of muxes (actually N-1) configured in the

TTGEN memory image file.

Action: Reissue the SHUTDOWN request with the correct card

number.

Message 052 - Card <number> shutdown completed

Explanation: Message printed as a result of the ZMON SHUTDOWN

request being issued. Once this message appears the

card is shutdown and the amber LED is flashing on the

back of the card. The card may be restarted using the

ZMON RESTART command.

Action: None

Message 060 - ioctl(status) error: <zcom error>

Explanation: Message is displayed after a ZMON STATUS request is

issued and ZMON cannot successfully read the ZCOM

status.

Action: If problem persists report it to HP.

Message 061 - Status since <date/time> - Aborted (must reset)

Explanation: Message printed as a result of the ZMON STATUS

request being issued. This status means that the

ZCOM system has failed during a previous startup,

and is unusable.

Action: A cold start is needed to bring up an usable ZCOM

system.