ACC Error Guide

ZMON Error Messages

Chapter 6 129

Message 074 - ioctl(reset) error: <zcom error>

Explanation: Message printed as a result of a ZCOM reset request

being issued. The message indicates the IOCTL

request to reset the ZCOM system has failed.

Action: Report the problem to the nearest HP representative.

Message 075 - ZCOM system stopped

Explanation: Message printed as a result of the ZMON STOP

request being issued.

Action: None

Message 100 - Card <number> starting up …

Explanation: Message displayed to indicate a Mux card is being

started or restarted.

Action: None

Message 101 - Card <number> can’t read IFT record: <reason>

Explanation: During the restart/shutdown of a Mux card, ZMON

needs to retrieve the card configuration information.

This information is contained in the ZCOM IFT

(interface table) and must be read via the /dev/zmon

device file. This error indicates the read has failed for

some reason. The restart/shutdown of the card is

abandoned if this error is encountered.

Action: Report the problem to the nearest HP representative.

Message 102 - Card <number> partial read of IFT record

Explanation: During the restart/shutdown of a Mux card ZMON

reports the last backplane activity that the DAM

attempted to the card. This information is contained in

the ZCOM IFT (interface table) and must be read via

the /dev/zmon device file. This error indicates the read

has failed for some reason. The restart/shutdown of the

card is abandoned if this error is encountered.

Action: Report the problem to the nearest HP representative.