ACC Error Guide

ZMON Error Messages

Chapter 6132

Message 109 - Card <number> request ignored because it’s an old

request

Explanation: ZMON displays this message when it receives an

Interface Restart Request (IRR) and finds that the

current system is already restarted AFTER the time

when this IRR is generated. This usually happens

when there are multiple IRRs generated during a card

startup (e.g. an unstable card may fail a few times

during its startup). The first IRR causes ZMON to

restart the card, so all the repeated ones can be

ignored.

Action: None. This message is for information only. It implies

the a card failed multiple times during restart. If this

happens persistently on a particular card, it could

mean the card may have a hardware (or firmware)

problem.

Message 110 - Card <number> startup successful, card READY

Explanation: The Mux card has been successfully started and is

ready for use.

Action: None

Message 111 - Card %d Last BP command: <Hex command codes>

Explanation: The Mux card hardware or software has failed for some

reason. The hex codes are displayed for diagnostic

purposes. These codes represent the last backplane

command executed by the driver (DAM). This

information may be useful in determining the cause of

the failure.

Action: Report these values to HP to assist in diagnosing the

reason for the failure.