ACC Error Guide

ZMON Error Messages

Chapter 6 133

Message 112 - Card <number> Current ports: Hi-Pri <number>

Lo-Pri <number>

Explanation: The Mux card hardware or software has failed for some

reason. These port numbers represent the last ports

accessed by the driver. This information may be useful

in determining the cause of the failure.

Action: Report these values to HP to assist in diagnosing the

reason for the failure.

Message 113 - Card <number> Current terminal: ZLU <number>

Port <number> Term <number>

Explanation: The Mux card hardware or software has failed for some

reason. These port and terminal numbers represent the

those last accessed by the driver. This information may

be useful in determining the cause of the failure.

Action: Report these values to HP to assist in diagnosing the

reason for the failure.

Message 114 - Card <number> Bad current PTT pointer 0x<address>

Explanation: The driver has passed a bad terminal number value to

ZMON and it is unable to find the physical terminal

table entry (PTT).

Action: Report these values to HP to assist in diagnosing the

reason for the failure.

Message 115 - Card <number> Current ports: Expr-Pri 0x<#>,

Hi-Pri 0x<#>, Lo-Pri 0x<#>

Explanation: The Mux card hardware or software has failed for some

reason. The hex codes are displayed for diagnostic

purposes. These codes represent the last backplane

command executed by the driver (DAM). This

information may be useful in determining the cause of

the failure.

Action: Report these values to HP to assist in diagnosing the

reason for the failure.