ACC Error Guide

ZMON Error Messages
ZMON Error Messages
Chapter 6 137
Message 206 - Card <number> set-ready error: <reason>
Explanation: Message is displayed when ZMON is attempting an
operation on a Mux card and it fails. The error may be
either a file system error or a ZCOM error. The cause of
the error is displayed in the reason field.
Action: Take appropriate action to rectify the problem and
restart the Mux card, or restart the ZCOM system.
Message 207 - Card <number> halt error: <reason>
Explanation: Message is displayed when ZMON is attempting an
operation on a Mux card and it fails. The error may be
either a file system error or a ZCOM error. The cause of
the error is displayed in the reason field.
Action: Take appropriate action to rectify the problem and
restart the Mux card, or restart the ZCOM system.
Message 208 - Card <number> flush error: <reason>
Explanation: Message is displayed when ZMON is flushing a Mux
card and it fails. The error may be either a file system
error or a ZCOM error. The cause of the error is
displayed in the reason field.
Action: Take appropriate action to rectify the problem and
restart the Mux card, or restart the ZCOM system.
Message 221 - Card <number> Hard error - card is unusable
Explanation: Message printed as a result of a serious selftest failure.
The LED on the back of the card will be RED or OFF.
The card will be unusable and all terminals configured
on the card will be unavailable. Use the ZMNTR with
the tta command to view terminals configured on the
card—the tt command alone will not work.
Action: At a convenient time, shutdown the system and replace
the Mux card. Note other Mux cards (if any) will
continue operating normally.