ACC Error Guide

ZMON Error Messages
ZMON Error Messages
Chapter 6138
Message 222 - Card <number> Port controller test failed
Explanation: Message printed as a result of a selftest failure. The
LED on the back of the card will be AMBER. The port
will be unusable and all terminals configured on the
port will be unavailable. Use the ZMNTR with the tta
command to view terminals configured on the
port—the tt command alone will not show the
unavailable terminals.
Action: At a convenient time, shutdown the system and replace
the Mux card. Note other Mux cards (if any) will
continue operating normally.
Message 223 - Card <number> Programmable Reload Timer failed
Explanation: Message printed as a result of a serious selftest failure.
The LED on the back of the card will be RED or OFF.
The card will be unusable and all terminals configured
on the card will be unavailable. Use the ZMNTR with
the tta command to view terminals configured on the
card—the tt command alone will not show the
unavailable terminals.
Action: At a convenient time, shutdown the system and replace
the Mux card. Note other Mux cards (if any) will
continue operating normally.
Message 224 - DMA memory-to-memory test failed
Explanation: Message printed as a result of a serious selftest failure.
The LED on the back of the card will be RED or OFF.
The card will be unusable and all terminals configured
on the card will be unavailable. Use the ZMNTR with
the tta command to view terminals configured on the
card—the tt command alone will not show the
unavailable terminals.
Action: At a convenient time, shutdown the system and replace
the Mux card. Note other Mux cards (if any) will
continue operating normally.